system DC2, EC-Oil is offered an automatic quick hitch system as a standard. This means that the tiltrotator and hydraulic tools can be connected & disconnected without the operator needing to leave the cab. Comes supplied with hose, quick couplings and electrical installation equipment for one machine.\n \n Characteristics:\n \n The EC-Oil automatic quick hitch system connects the tiltrotator & hydraulic tools without the operator needing to leave the cab.\n Q-Safe quick hitch for high safety\n Comes ready for detachable gripper GRD (QSD45)\n Comes ready for rotating brush SWD (QSD45)\n Comes ready for the QSC locking system to avoid wrongly connected or dropped buckets\n Comes ready for a rotation sensor (ePS) for connection to the excavator guidance system\n Central lubrication (a single grease point for the entire tiltrotator; can also be connected to the excavator’s central lubrication system)\n Load-holding valves on tilt cylinders for high safety\n Hardened piston rods\n Up to ± 45-degree tilt angle for best access\n Rotation ∞\n Quick hitch: Standard –QS45 For other purposes, we can supply most types of hitches available on the market.\n \n Control system: Standard – DC2 proportional control system for infinitely variable control with remote support capability, track/wheel steering and boom slew. For other purposes, we can deliver custom control systems.\n \n Electrical system: Can be adapted for 12 or 24 volt electrical systems.\n \n Accessory: GRD detachable gripper cassette, SWD detachable rotating brush.\n \n Technical specifications\n \n Width A [inches]:10.9\n Width B [inches]:9.8\n Width C [inches]:10.7\n Total length D [inches]:22.1\n Build height E [inches]:16.7\n Tilt [°]:2×40\n Weight [lbs]:631.4\n Max bucket width recommended by engcon [inches]:51.2\n Rec hydraulic flow DC2/SS10 [gal/min]:15.9\n Rec hydraulic flow SS9 tilt/rotation [gal/min]:9.2/10.6\n Max hydraulic pressure [psi]:3,191\n Max breakout torque [lbf]:54,580\n Standard mounting:QS45,QS50\n Base machine weight [lbs]:13,200-19,800\n Width A [mm]:277\n Width B [mm]:250\n Width C [mm]:273\n Total length D [mm]:561\n Build height E [mm]:425\n Tilt [°]:2×45\n Weight [kg]:287\n Max bucket width recommended by engcon [mm]:1,300\n Rec hydraulic flow DC2/SS10 [l/min]:60\n Rec hydraulic flow SS9 tilt/rotation [l/min]:35/40\n Max hydraulic pressure [MPa]:22\n Max breakout torque [kNm]:74\n Standard mounting:QS45,QS50\n Base machine weight [t]:6-9"}" data-sheets-userformat="{"2":15233,"3":{"1":0},"10":2,"11":3,"12":0,"14":{"1":2,"2":0},"15":"Calibri, sans-serif","16":8}">Suitable for all excavators in the 6-9 tonne weight class
A compact, powerful tiltrotator with low weight for excavators up to 9 tons. If the EC209 is selected with engcon’s standard quick hitch QS45 and the proportional control system DC2, EC-Oil is offered an automatic quick hitch system as a standard. This means that the tiltrotator and hydraulic tools can be connected & disconnected without the operator needing to leave the cab. Comes supplied with hose, quick couplings and electrical installation equipment for one machine.

Characteristics:

The EC-Oil automatic quick hitch system connects the tiltrotator & hydraulic tools without the operator needing to leave the cab.
Q-Safe quick hitch for high safety
Comes ready for detachable gripper GRD (QSD45)
Comes ready for rotating brush SWD (QSD45)
Comes ready for the QSC locking system to avoid wrongly connected or dropped buckets
Comes ready for a rotation sensor (ePS) for connection to the excavator guidance system
Central lubrication (a single grease point for the entire tiltrotator; can also be connected to the excavator’s central lubrication system)
Load-holding valves on tilt cylinders for high safety
Hardened piston rods
Up to ± 45-degree tilt angle for best access
Rotation ∞
Quick hitch: Standard –QS45 For other purposes, we can supply most types of hitches available on the market.

Control system: Standard – DC2 proportional control system for infinitely variable control with remote support capability, track/wheel steering and boom slew. For other purposes, we can deliver custom control systems.

Electrical system: Can be adapted for 12 or 24 volt electrical systems.

Accessory: GRD detachable gripper cassette, SWD detachable rotating brush.

Technical specifications

Width A [inches]:10.9
Width B [inches]:9.8
Width C [inches]:10.7
Total length D [inches]:22.1
Build height E [inches]:16.7
Tilt [°]:2×40
Weight [lbs]:631.4
Max bucket width recommended by engcon [inches]:51.2
Rec hydraulic flow DC2/SS10 [gal/min]:15.9
Rec hydraulic flow SS9 tilt/rotation [gal/min]:9.2/10.6
Max hydraulic pressure [psi]:3,191
Max breakout torque [lbf]:54,580
Standard mounting:QS45,QS50
Base machine weight [lbs]:13,200-19,800
Width A [mm]:277
Width B [mm]:250
Width C [mm]:273
Total length D [mm]:561
Build height E [mm]:425
Tilt [°]:2×45
Weight [kg]:287
Max bucket width recommended by engcon [mm]:1,300
Rec hydraulic flow DC2/SS10 [l/min]:60
Rec hydraulic flow SS9 tilt/rotation [l/min]:35/40
Max hydraulic pressure [MPa]:22
Max breakout torque [kNm]:74
Standard mounting:QS45,QS50
Base machine weight [t]:6-9