for using the pallet fork on each individual machine. When using the pallet fork together with a tiltrotator, a load-holding valve must be fitted to the tiltrotator. All Engcon tiltrotators are fitted with load-holding valves in the tilt cylinders as standard equipment.\n \n Mechanical hydraulic pallet forks are held in the correct position with a robust latch and the position is adjusted manually.\n Forged forks for increased durability and service life\n The illustration shows a typical configuration. Technical data may vary.\n We reserve the right to make changes without prior notice.\n \n Technical specifications\n \n GH1000 GH1200 GH1500\n Width [inches]: 39.4 59.1\n Fork [inches]: 3.9×1.6×47.2 4.9×1.8×47.2 4.9x2x59.1\n Weight [lbs]: 396 770 924\n Base machine weight [lbs]: 8,818–72,752 8,818–72,752 8,818–72,752\n TP500 [lbs]: 6,393 10,361 12,566"}" data-sheets-userformat="{"2":12673,"3":{"1":0},"10":2,"11":3,"15":"Calibri","16":8}">For excavators weighing 6—18 tons
Engcon’s pallet fork – A robust and cleverly engineered design for best visibility. Tempered forks guarantee a long service life.

NOTE! Always consult the applicable safety instructions for using the pallet fork on each individual machine. When using the pallet fork together with a tiltrotator, a load-holding valve must be fitted to the tiltrotator. All Engcon tiltrotators are fitted with load-holding valves in the tilt cylinders as standard equipment.

Mechanical hydraulic pallet forks are held in the correct position with a robust latch and the position is adjusted manually.
Forged forks for increased durability and service life
The illustration shows a typical configuration. Technical data may vary.
We reserve the right to make changes without prior notice.

Technical specifications

GH1000 GH1200 GH1500
Width [inches]: 39.4 59.1
Fork [inches]: 3.9×1.6×47.2 4.9×1.8×47.2 4.9x2x59.1
Weight [lbs]: 396 770 924
Base machine weight [lbs]: 8,818–72,752 8,818–72,752 8,818–72,752
TP500 [lbs]: 6,393 10,361 12,566